Greif Czech Republic a.s.
News
2nd Supervizory ISO audit
The company has successfuly passed through the second supervizory audit QMS & EMS & Safety in August. The task of the audit was to set the alignment of the integrated management system with the requirements of individual ISO standards ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007. The up-to-date certificates are available in the section 'Downloads'.
New National Sales Manager
Mr. Jaromír Štádler joined the company as the new National Sales Manager as from 1.12.2017
Standard conditions of guarantee
Standard conditions of guarantee available in our web pages
Contact Us

Galvanized Tight Head Drum DG 55 Zn

Drum with excellent water resistance
(216,5 litres)
 

Galvanized Tight Head Drum DG 55 Zn have increased resistance to the action of the contents and are more resistant to chemical reaction. Galvanized drums do not meet the requirements for acid solution wash-out during recondition.

The double-side hot-dip galvanized steel sheet makes the drum highly resistant to the action of water, humidity and weather conditions.

General Description

  • Steel drums production complies with strict UN regulations for packing dangerous goods in the packaging groups I/X, II/Y, III/Z
  • The tightness of each drum is checked with an automatic testing device. This guarantees the highest safety of the drums for transport and storage
  • They are suitable for outdoor storage

Standard Specification

Steel Sheets

 
Galvanized drums are produced from steel sheets DX51D+Z 140 produced in accordance to EN 10142:1990/A:1995 and their properties comply with EN 10143:1993.
 

Closures

The drums can be supplied with a combination of Tri-Sure® 4S® G2" and G3/4" closures in the lid. Screw closures comply with the international standards of EN ISO 15750-3. Closures can be closed and sealed with Tab-Seal® caps in neutral or customer design. Closure flanges have standard sealing with a high-resistance system of 4S® sealing rings.

 

Construction

Body seam: Continuous resistance weld.
Standards: Drums are produced in accordance with EN ISO 15750-2.
 

Classification according to the type of transport

In compliance with the valid legislation and legislative executive regulations are drums of the Greif company production tested in accordance with the UN recommendations specified in Transports of dangerous goods – Model regulations and the sections of the International Collection for Transportation Chains as RID/ADR/IMDG – Code/ICAO – IATA/ADN. 

 

UN Code marking

The UN code is embossed on the drum bottom and printed on the lower part of the drum body in accordance with international regulations.

Galvanized Tight Head Drum DG 55 Zn - 216,5l

Body configuration

In the basic configuration Drums are provided with two rolling beads in each thickness variant – type A. By 1.0 mm - 1.2 mm thickness the Spiraltainer® reinforcement can be added – type B. Combination of Spiraltainer® reinforcement and 2 x 3 additional corrugations – type C – is optimal for drum bodies with thickness less than 1.00 mm. Type C enhances the body resistance against deformations by radial forces during transport or manipulation.

 

Spiraltainer®

Drums with Spiraltainer® reinforcement have increased resistance against decompression in comparison to conventional rolling beads of type A. Drums with Spiraltainer® reinforcement enable filling of substances under higher temperatures without the risk of drum body deformation. 

 

Compatibility

Drums with all types of beads/corrugation at ∅ 585 mm are fully compatible with 20 and 40 feet ISO containers which can hold 80 or 160 filled drums placed by fours next to each other. The compatibility is also ensured by using of 800 x 1200 mm or 1200 x 1200 mm pallets.

 

Bottom/lid to body seaming

The seam is done with a safety double seaming Spiralon®.
 

Legislation

The products of Greif Czech Republic a.s. are supplied in accordance with the valid legislation.