Open Head Drum NSK can be supplied with handles welded on the upper part of the drum body. Protection of the external surface is ensured with environment-friendly water based paint that meets all legislative requirements.
- Drums with raw surface of the interior are suitable for packaging products that do not react with steel
- Steel drums production complies with strict UN regulations for packing dangerous goods in the packaging groups I/X, II/Y, III/Z
Plain and coated drums are produced from steel sheets FeP01 produced in accordance to EN 10 130 and their properties comply with EN 10 131 and their national equivalents.
The drums can be supplied with a combination of Tri-Sure® 4S® G2" and G3/4" closures in the lid. Screw closures comply with the international standards of EN ISO 15750-3. Closures can be closed and sealed with Tab-Seal® caps in neutral or customer design. Closure flanges have standard sealing with a high-resistance system of 4S® sealing rings.
Body seam: Continuous resistance weld.
Classification according to the type of transport
In compliance with the valid legislation and legislative executive regulations are drums of the Greif company production tested in accordance with the UN recommendations specified in Transports of dangerous goods – Model regulations and the sections of the International Collection for Transportation Chains as RID/ADR/IMDG – Code/ICAO – IATA/ADN.
Bottom to body seaming
The seam is done by a safety seaming with sealing material.
Lid to drum seaming
Drum lids are fixed with a closing ring with lever, which can be secured with a steel/plastic safety plate or with M8 nut and bolt.
Conical shape of drum body allows effective stacking.
The UN code is embossed on the drum bottom and printed on the lower part of the drum body in accordance with international regulations.
The products of Greif Czech Republic a.s. are supplied in accordance with the valid legislation.