Open Head Drum DN are supplied in the configuration for solid or liquid materials. Protection of the external surface is ensured with environment - friendly water based paint that meets all legislative requirements.
Drums can be delivered uncoated, with external coating in one or more colours, internally coated with special paint RDL® or they can be manufactured from double-side hot-dip galvanized steel sheets.
General Description
- All drum types can be supplied with a silk screen printed customer’s logo
- Drums with raw surface of the interior are suitable for packaging products that do not react with steel
- Steel drums production complies with strict UN regulations for packing dangerous goods in the packaging groups I/ X, II/Y, III/Z
- In the version for liquids is the tightness of each drum checked with an automatic testing device. This guarantees the highest safety of the drums for transport and storage
Standard Specification
Steel Sheets
Plain and coated drums are produced from steel sheets FeP01 produced in accordance to EN 10 130 and their properties comply with EN 10 131 and their national equivalents. Galvanized drums are produced from steel sheetsDX51D+Z 140 produced in accordance to EN 10142: 1990/A:1995 and their properties comply with EN 10143:1993.
Closures
The drums can be supplied with a combination of Tri-Sure® 4S® G2" and G3/4" closures in the lid. Screw closures comply with the international standards of EN ISO 15750-3. Closures can be closed and sealed with Tab-Seal® caps in neutral or customer design. Closure flanges have standard sealing with a high-resistance system of 4S® sealing rings.
Construction
Lid to body seaming
Drum lids are fixed with a closing ring with lever. Closing ring can be also secured with bolts and nuts. Drum lids for liquid materials are sealed with a sticking rubber sealing and fastened with a closing ring with reinforced construction.
Classification according to the type of transport
In compliance with the valid legislation and legislative executive regulations are drums of the Greif company production tested in accordance with the UN recommendations specified in Transports of dangerous goods – Model regulations and the sections of the International Collection for Transportation Chains as RID/ADR/IMDG – Code/ICAO – IATA/ADN.
Body configuration
In the basic configuration, regardless of the thickness, drums are equipped with two rolling beads with diameter of 595 mm – type A. 2 x 3 additional corrugations enhance the body resistance against deformation by radial forces during shipment or manipulation – type B.
Bottom to body seaming
The seam is done with a safety double seaming Spiralon®.
UN Code marking
The UN code is embossed on the drum bottom and printed on the lower part of the drum body in accordance with international regulations. Legislation The products of Greif Czech Republic a.s. are supplied in accordance with the valid legislation.